Tips for Cleaning and Maintaining Glass Doors

Glass doors and windows are great for letting natural light into your home and improving its appearance. But if they’re dirty, they won’t do their job properly and can even damage the glass over time. This is especially important when moving out of a rented property, as dirty glass can affect your deposit refund.

You can hire professionals to clean your whole property, but if the glass is particularly dirty because you haven’t maintained it, your landlord might use some of your deposit to cover the cost of cleaning or replacing it. To avoid this, follow these tips to clean your glass doors and windows like a pro.

Tips for Cleaning and Maintaining Glass Doors

1. Use Microfiber Cloths Regularly

Microfiber cloths are soft and great for cleaning glass doors and windows. They trap dust and dirt effectively, leaving your glass surfaces streak-free. To get rid of fingerprints and smudges, use a dry microfiber cloth and wipe from top to bottom.

This technique, often used by professional cleaners, helps save time and effort. When wiping, use elongated strokes in an ‘S’ pattern to ensure dirt falls away and doesn’t spread back onto cleaned areas.

2. Avoid Commercial Cleaners

While commercial glass cleaners might seem like an easy solution, they often contain harmful chemicals that can affect your health and indoor air quality. Instead, opt for a simple solution of dishwashing liquid and warm water in a spray bottle.

Spray generously on the glass, let it sit for a minute, then scrub with a damp sponge in circular motions. Rinse with water or wipe with a microfiber cloth to remove any residue.

3. Clean with White Vinegar

White vinegar mixed with warm water (50/50 ratio) makes an effective and eco-friendly cleaner for glass surfaces. It’s great for removing grime, grease, and dirt without leaving streaks. Simply spray the solution onto the glass, wait a minute, then wipe it off with a microfiber cloth.

This method works well for treating cloudy glass doors and windows. If the glass remains cloudy despite repeated cleaning, it may be permanently damaged and need replacement.

4. Deep Clean with Baking Soda Paste

For tough stains like smudges and hard water marks, you can make a paste using baking soda, water, and dishwashing liquid. Here’s how to do it:

– Apply this made paste on the glass surfaces.

– Let it sit for 15-20 minutes, then gently scrub with a damp sponge.

– Wipe off the paste with a paper towel.

– Finally, spray the area with water and wipe it dry with a microfiber cloth.

5. Spot-Clean with Rubbing Alcohol

Rubbing alcohol is great for sanitizing surfaces. To spot-clean glass doors and windows:

– Spray rubbing alcohol on the affected areas.

– Wipe it off with a microfiber cloth.

– Make sure the rubbing alcohol you use has at least 70% isopropyl and 30% water for effective cleaning. Avoid using solutions with less than 70% alcohol content or more than 90% as they won’t work as well.

6. Avoid Harsh Tools

Glass surfaces are easily scratched, so avoid using harsh cleaning tools like steel wool or metal scrapers. Instead, use soft-bristle brushes, sponges, and microfiber products to scrub and wipe. After cleaning, remove excess water with a rubber squeegee or a microfiber towel.

How to Clean Your Glass Doors

Supplies You’ll Need:

– Distilled water

– Vinegar

– Rubbing alcohol

– Spray bottle

– Newspapers

– Microfiber cloths

– Nonabrasive sponge

– Squeegee

– Bucket

1. Remove Visible Dirt:

Start by wiping away any dust and dirt buildup. Use a mixture of water and soap on both sides of the glass. Once the surface is clean, use either a homemade or commercial cleaner to achieve that streak-free sparkle you desire.

Remember to clean your glass doors regularly. It only takes a few minutes to wipe down a relatively clean surface, but it can take hours to remove built-up grime.

2. Enhance Homemade Cleaner with Alcohol:

For a more effective homemade cleaner, mix 1 cup of rubbing alcohol, 1 cup of water, and 1 tablespoon of vinegar. This combination evaporates quickly, making it easier to clean and polish the glass.

3. Clean in Sections:

Divide the door into sections and clean them one by one. This helps you keep track of what you’ve cleaned and ensures you cover the entire surface evenly.

4. Clean from Top to Bottom:

Start cleaning at the top of the door and work your way down. This prevents cleaning solution from dripping onto already cleaned areas due to gravity.

5. Rub in Different Directions:

Spray your cleaner onto the glass and clean in circles, then up and down, and finally side to side. This ensures thorough cleaning.

6. Buff with Microfiber:

After cleaning, use a microfiber cloth to buff the glass for a shiny finish.

7. Choose a Cloudy Day for Cleaning:

Cleaning on a sunny day can cause the cleaning solution to dry too quickly, leaving streaks. Opt for a cloudy day instead, which gives you more time to wipe away the solution and polish the glass for a shiny finish.

8. Use a Squeegee Instead of Wiping:

Avoid smudges and streaks by using a squeegee. One pass with a squeegee leaves your glass clean and streak-free.

9. Clean the Corners Carefully:

Don’t forget to clean the corners, where residue can accumulate. Use cotton swabs to reach and clean these hard-to-reach areas effectively.

10. Use Old T-Shirts to Reduce Lint:

If you don’t have lint-free materials like newspapers, old t-shirts work well for cleaning glass. They absorb well and usually don’t leave residue. Plus, it’s an eco-friendly way to clean and saves money.

Cleaning Your Aluminum Frame

To keep your aluminum frame looking new, scrub off dirt and grime with a soft-bristle brush and your chosen cleaner. Be gentle when dealing with oxidation and water spots. After cleaning, use an aluminum polish to restore shine and protect against future corrosion.

Establishing a Cleaning Routine

To keep your aluminum glass doors in top condition:

Weekly: Quickly wipe down the glass to remove fingerprints and dust.

Monthly: Do a more thorough cleaning, including both glass and frame, to ensure a spotless appearance.

Seasonally: Take the time for a deep clean and inspection, especially during changing seasons, to spot any wear or damage.

Annually: Consider a professional inspection to catch any potential issues early on.

Cleaning the Hardware

Maintain the hardware on your glass doors by polishing them with a metal cleaner. Remember to lubricate the locks occasionally to keep them in good condition. Use WD-40 spray with an extension straw for easy application. Test the locks after lubricating and remove any excess lubricant.

2 thoughts on “Tips for Cleaning and Maintaining Glass Doors”

  1. You made some decent points there. I looked on the internet for the subject matter and found most people will agree with your blog.

    Reply

Leave a Comment